Shop

For easy configuration of the Modbus KNX Gateway MG/S 11.100.1.1. With this DCA, the mapping of the Modbus KNX data points of a server can be exported as a reusable template. The DCA can also be used to import ready-made device templates from a database.

This app is used to import the KNX configuration file for the GM/A 8.1 KNX Security Panel into ETS. Importing the KNX configuration file enables all relevant group objects of the KNX Security Panel in ETS. This app is not needed for general device settings or for device programming (download).

This app is used to configure the AC / S 1.x.1 Application Controllers. The graphical user interface of this app allows an intuitive parameterization of the application-specific automation modules (ASM).Basic device settings and device programming (download) are also possible without this app.

This App is needed for configuration of the BJE 6186/40 Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All 6186/40 in the project can be processed at the same time. The download into the device is done by normal ETS download.

The ETS-App Update Copy Convert provides a series of useful functions for the ETS application and device configuration (parameters and group addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

This app integrates the software suite ABB Automation Builder into ETS.
The Automation Builder is used to create the automation programs for the BAC/S Building Automation Controllers and the ABB AC500 Programmable Logic Controllers (PLC).
With this app, the data exchange of the KNX Group Objects defined in the automation programs takes place with the ETS.
These app transfer the KNX Group Objects used in the automation programs to the ETS. It supports the BAC/S1.x.1 Building Automation Controllers as well as the ABB AC500 Programmable Logic Controllers (PLC) with activated KNX runtime license (PS5604-KNX).

A plugin of configuration DALI bus deveice by KNX bus

The app is used for the convenient configuration of SmartTouch, RoomTouch and IPTouch.

The ETS app "ABB Firmware Update 2.0" serves for updating the firmware of different ABB KNX devices directly via the KNX bus. The latest firmware files can be downloaded automatically from the Internet or imported manually.
The app can be used with the ETS 5 or higher.

Attention:
It replaces the "KNX Bus Update" app.

DLC-02-KN is a KNX to DALI gateway, used to connect DALI ECGs/ Driver via KNX installation.
This device Configuration App (DCA) is designed for the special surface for the DALI configurations.

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

KNX Gateway for IR Configuration App is a plugin of configuration the KNX Gateway for IR,Flush mounted/Ceiling by KNX bus

A plug-in of configuration DALI bus device of KNX

A plug-in of configuration IR bus device of KNX

The app is used for convenient configuration of SmartTouch 10.

KNX IR Transmitter Configuration App is a plugin of configuration the KNX IR Transmitter Flush Mounted 2 Fold by KNX bus

A plugin of configuration for KNX IR device

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

ABB Building Planner Import

The IoT Dashboard ETS App enables you to export the complete building structure and all group addresses from the ETS into the IoT Dashboard. This dashboard provides you with preprogrammed frames to get fast and high quality results. It makes it possible to do changes very quick and easy and thanks to this app you can load all data back into ETS very quickly.

This app allows you to configure the Berghof MX6 controllers.

This app is required to configure the Theben AC IR gateway. With the help of the app, the manufacturer of the split unit and the model of the remote control are loaded into the ETS application.
All Theben AC IR Gateways in the project can be edited simultaneously. The download into the device is then carried out via the normal ETS download.

This App is needed for configuration of the Control4 C4-KNX-SUAC Split Unit Gateway. The manufacturer of the split unit and the model of the remote are loaded into the ETS application.
All SUG/U 1.41 in the project can be processed at the same time. The download into the device is done by normal ETS download.

Device Configuration App (DCA) for IPAS DALIControl gc16plus (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-1 Plus_V1.1.0, DaliControl gc16-2 Plus_V1.1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Please note currently working only with ETS 6.1.0. We apologize for the inconviniece. We are currently working on a new version compatible with 6.1.1.

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS6 Professional is required.

Device Configuration App (DCA) for Ekinex KNX/DALI gateway EK-BF1-TP-D1 (1 channel) or EK-BF1-TP-D2 (2 channels)
Order No.: EK-BF1-TP-D1 DALI2 1CH, EK-BF1-TP-D2 DALI2 2CH
Application: APEKBF1TPD1_V1.1.0, APEKBF1TPD2_V1.1.0

Coloured light control including device type 8 ECGs
Colour temperature (DT-8 Sub-Type Tc)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)
DT-8 Sub-Type PrimaryN is not supported.

With ETS App Device Compare you can compare the an individual device from the installation with the available data in the corresponding ETS project. In this way the current state as in the installation can be compared with the expected state as in the ETS project. Dissimilarities in device configuration will be shown and the result can also serve as evidence in case a third party has tampered with the installation.

The ETS App Extended Copy is used to quickly create similar structures in a project. During the copy process, a dedicated dialog will allow devices, bus lines, even complete building parts together with their destination address assignments, configuration, Group Addresses, links, text descriptions and other information to be adjusted. Thereafter, the configuration is inserted seamlessly.

With the ETS App My Device Templates you can configure devices in your project, save the configuration as template and then reuse it in other projects as well so that you do not have to configure the devices again and again in the same way.

Graphical tool for integration of KNX networks, providing a flexible and user-friendly interface based on floor plans. Ideally suited for commercial building, retail shops or hotels of any size. The tool is particularly suited for flexible room automation.

KNX Space Commissioning works with any device from any manufacturer.
A KNX device is described into a collection of assets (ex. lamps, switches, sensors, etc.). Then, each asset can have different usages adjusting its parameters.

The assets are then gathered under a space, which dynamically creates the right Group Addresses (with Group Objects). A space may be an office, a room in hotel, a corridor, a facade, etc.
All the engineering is dynamic and gets adapted to the space created, whether it is large, small, with more or less assets, etc.
The solution can be exported as a package and reused across projects.

KNX Space Commissioning also allows the export of the project into the ABB Building Edge, which is a solution hosting applications such as ABB Ability Control Hub, used for monitoring and control of buildings.

This ETS App is intended to exchange Group Address information of Busch-ComfortTouch® panels from Busch-Jaeger or ABB between ETS and IPP. The ETS App provides IPP data with recent changes in ETS and vice versa ETS data in IPP. By pressing the import button you can import XML files that were created by IPP into ETS. Using the export button you can generate an XML file for import into IPP.

To import the configuration of a KNX project into a management application like an OPC server, the ETS offers an export function called "Export OPC". This export functionality provides only basic information about the KNX installation. The NETx BMS App is a user-friendly way to import the whole KNX project and its meta-information into the NETx BMS Server or the NETx KNX OPC Server. The output of this ETS App is an enhanced export file that contains the used KNX Group Addresses, the deployed KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and Group Objects) as well as the building and trade view. In addition, the App detects the configured IP addresses of the KNXnet/IP routers and interfaces. Based on the topology of the KNX project, the App automatically assigns the KNX Group Addresses to the routers and interfaces that are later on used for accessing them. Thus, a manual, time-consuming and error-prone assignment of the KNX Group Addresses to the KNXnet/IP routers and interfaces is not necessary anymore. Using the NETx BMS App, the whole KNX project including the well-known ETS view can be imported into the NETx BMS Server or NETx KNX OPC Server in a fast and intuitive way.

Easy2ETS tool can be used to read out an installation made of Easy Hager and Berker devices configured with TXA100 and to take over the configuration with ETS.
Note:
- RF Devices cannot be read out.
- Bus access and ETS products data are required (product database).

‘eConfigure KNX’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://www.se.com/ww/en/product/LSS900100/knx-graphical-software-econfigure-knx-lite-for-250-knx-devices/
Note: ETS5 Professional is required.

Device Configuration App (DCA) for IPAS DALIControl gc16 (1 or 2 Channel)
Order No.: 4101-145-11, 4101-145-21
Application: DaliControl gc16-01-0110, DaliControl gc16-2-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The NETx BMS App Secure is a user-friendly way to import the whole KNX project and its meta-information into the NETx Server. The export file contains enhanced information like the used KNX group addresses, the deployed (secure) KNXnet/IP routers and interfaces, and the full ETS project structure including the network topology (areas, lines, devices, and communication objects) as well as the building and trade view. Compared to the standard NETx BMS App, the NETx BMS App Secure also exports the information required to access secure KNXnet/IP routers and interfaces. Furthermore, it allows the export of the configuration of KNX/DALI gateways that is used by the NETx LaMPS Module.

TheKNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

The KNX DALI-Gateway Basic REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

‘eConfigure KNX Student’ by Schneider Electric is a graphical configuration ETS app for KNX projects. This tool is adapted for residential projects and small / medium building projects. You can design the complete KNX project by drag-and-drop sensors and loads directly to a floor plan of the building and connect them easily. The actuators are automatically generated and linked to loads in each floor of the building.
Please find the product catalog: https://ecobuilding.schneider-electric.com/products/light-and-room-control/knx-system/econfigure-knx-lite/technical-documentation#tab/documents

The Weinzierl BAOS CSV Importer is an easy way to export the existing configuration of a generic BAOS database to a CSV file and import it into another project. This eliminates the need for tedious manual configuration. The Weinzierl BAOS CSV Importer is available for all Weinzierl BAOS devices with a generic ETS product database.

This app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.
The functions are:
Update: Changes the application program to a later or earlier version while retaining current configurations.
Convert: Transfers/adopts a configuration from an identical or compatible source device.
Channel Copy: Copies a channel configuration to other channels on a multichannel device.
Channel Exchange: Exchanges configurations between two channels on a multichannel device.
Import/Export: Saves and reads device configurations as external files.

Griesser offers innovative configuration options. Using a tile system, functions are «stacked» according to their priority. This is similar to the list of priorities in a requirements specification.
Despite the high degree of flexibility, no programming language has to be learned because the intuitive tiles are configured in the predefined and tested scope. Each tile also contains «its own» communication objects and specific settings options.
After successful configuration, the functionality can be tested online and the individual statuses of each tile can be graphically visualized.

The app provides a series of useful functions for device configuration (parameters and Group Addresses) in an ETS project.

The functions are:
Update - Changes the application program to a later or earlier version while retaining current configurations.
Convert - Transfers / adopts a configuration from an identical or compatible source device.
Channel Copy - Copies a channel configuration to other channels on a multi-channel device.
Channel Exchange - Exchanges configurations between two channels on a multi-channel device.
Import / Export - Saves and reads device configurations as external files.

Device Configuration App (DCA) for IPAS DALIControl e64
Order No.: 4101-145-01
Application: DaliControl e64-01-0310

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

DCA for commissioning the MDT DaliControl Gateway SCN-DALI64.03.
This DCA can be used for commissioning and configuration of the DALI devices. The DALI devices can be assigned to the various groups and scenes and time controls can be implemented.
For more information: http://www.mdt.de

Device Configuration App (DCA) for Theben DALI-Gateway KNX plus
Order number: 9070929
Application: DALI-Gateway KNX plus (v2.0)
New features:
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The KNX DALI-Gateway REG-K is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The KNX DALI-Gateway REG-K/IP1 is a device used to control ECGs with a DALI interface via the KNX installation bus.

The special surface for the configuration of DALI segments is designed as a DCA (Device Configuration App) for the ETS5.

The Weinzierl KNX Modbus Gateway ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl KNX Modbus RTU Gateway 886 database and import it into another gateway. This saves a tedious manual configuration.

This application describes the supervision of a KNX installation for the "Energeasy connect by Rexel" home automation box. Ideal for housing and small tertiary.

The principle is simple:
1 / Set up your KNX installation with ETS5 (topology, addition of participants, settings, assignment of individual addresses and groups ...).

2 / The App then allows you to:
Describe the parts and equipment of your project (eg living room lamp, kitchen shutter, etc.).
KNX / IP gateway scanner.
Generate a .XML file describing the project configuration.

3 / Import the .XML into energeasy connect, allowing control via the E.Connect 2 application.

www.energeasyconnect.com/support/nous-contacter

The Csv Importer (DCA) enables a simple and effective configuration of the KNX TP communication module CM8400 from Neuberger Gebäudeautomation GmbH.
The configuration can be exported or imported into a CSV file. Via the CSV file, the configuration can be synchronised with the AS project in PMC Studio or re-imported in another project. Thus a laborious configuration by hand is spared.

The ETS app JUNG IPS-Remote enables the remote maintenance of KNX installations via the Internet after local approval by the customer.
The connection is established by the JUNG KNX IP Secure interfaces. The remote maintenance works independent of the type of internet connection and doesn´t require any configuration of the local network environment.
After release via a communication object, the IP interface establishes a connection to the Remote Access Server (RAS). The ETS app JUNG IPS-Remote also connects to this server and sets up the corresponding connection.
To establish an encrypted connection between the ETS and the remote IP interface, the new IPS-Remote connection must be used.

The app is used for the convenient configuration of SmartTouch, RoomTouch and IPTouch.

Device Configuration App (DCA) for IPAS DALIControl e64 Pro
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro-01-0110

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

This application enables advanced configuration and commissioning of the DALI ballasts with the Zennio DALI-BOX Interface v2.

Device Configuration App (DCA) for theben DALI-Gateway S64/S128 KNX
Order number: 4940301, 4940302
Application: DALI-Gateway S64 KNX, DALI-Gateway S128 KNX

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This DCA enables the KNX panel 8" from JUNG to be commissioned. With the seperate software JUNG KNX SMART PANEL DESIGNER the KNX-Panel 8" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the JUNG KNX SMART PANEL DESIGNER.

ETS stands for Engineering Tool Software; a manufacturer independent configuration software tool to design, configure and diagnose intelligent home and building automation installations based on KNX.

ETS is a software, which runs on Windows© platform based computers.

Compatible with Windows 10 and 11.
**The product can either be licensed via cloud or dongle.

ETS stands for Engineering Tool Software; a manufacturer independent configuration software tool to design, configure and diagnose intelligent home and building automation installations based on KNX.

ETS is a software, which runs on Windows© platform based computers.

Maximum 20 KNX products per project
Compatible with Windows 10 and 11.
Only available as cloud license
No dongle provided for this product

ETS stands for Engineering Tool Software; a manufacturer-independent configuration software tool to design and configure intelligent home and building control installations with the KNX system. ETS is a software, which runs on Windows platform-based computers.

This version is intended for private usage for those wanting to design and program their own home with KNX using the classic ETS software user interface already known for many years. You may create one single project containing a maximum of 64 KNX products from any KNX manufacturer.

By ordering this product you implicitly confirm that you are aware that the ETS6 Home is a license type that only allows the creation of one single KNX project with maximum 64 devices. The license type is intended for technical savvy persons or home owners that collaborate together with a skilled KNX installer

Maximum of 64 KNX devices in one single project.
Intended for private usage only
Compatible with Windows 10/11
Only available as cloud license
No dongle provided for this product

The SpaceLogic KNX DALI-Gateway Basic Plus is a device used to control ECGs with a DALI interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control 64 Gateway with article number SCN-DA641.04 and SCN-DA642.04

For devices with firmware version V1.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S

Area of application:
The FM-actuator devices SA/U1.16.x2 und SAH/U2.16.x2 can be maintained comfortably using the ETS Service App. It is possible to download new firmware to existing devices. In addition, older firmware versions can also be transferred to existing devices (e.g. in the case of a device exchange).
The programming interface of the ETS is used for a firmware programming operation. All KNX media are supported here (TP, IP, RF).

Device Configuration App (DCA) for Wieland Electric KNX-DALI Gateway gesis KNX FLEX-DA64
Order number: 83.020.0643.0
Application: gesis KNX FLEX-DA64 V1.0

Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

Theben DALI-Gateway S64 KNX, Theben DALI-Gateway S128 KNX
Order no.: 4940301, 4940302
Application: DALI-Gateway S64 KNX V2, DALI-Gateway S128 KNX V2

Device Configuration App (DCA) for the DALI configuration.
The DCA is used for addressing and grouping, as well as creating scenes and timers.
This DCA is compatible with the above application (V2) and devices with firmware 0.3x.

Theben DALI-Gateway P64 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

A plugin of configuration DALI bus device by KNX bus

This DCA enables the KNX IQ08 TPS from DIVUS GmbH to be commissioned. With the separate software DIVUS VISION for Windows the KNX IQ08 TPS can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the DIVUS VISION for Windows.

The app is used for the convenient configuration of SmartTouch 10.

This DCA Version A enables the KNX panel 7" Version A from Feller to be commissioned. Via the ConfigTool Version A the KNX-Panel 7" can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

This DCA enables the KNX-Panel 7" Version B from Feller to be commissioned. Via the ConfigTool Version B the KNX-Panel 7" version B can be parameterized easily and intuitively. Afterwards the configuration file is imported into the ETS via the DCA, where the group addresses are linked. The download is then carried out via the ETS standard mechanism. Furthermore, an existing parameterization can be exported in the DCA and thus be edited in the ConfigTool.

The Weinzierl Modbus TCP Gateway 716 ConfigTool provides a so-called DCA (Device Configuration App) for the ETS. With this it is possible to configure a Weinzierl Modbus TCP Gateway 716 database and import it into another gateway. This saves a tedious manual configuration.

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

Blumotix s.r.l.
Device Configuration App (dca) for BX-DALI-PLUS (AV06)
Order number: BX-DALI-PLUS
Application: BX-DALI-PLUS (AV06)
Device configuration DCA for the dali bus definition. The application is used to configure only DT6 dali devices, first enumeration, post-installation, groups and scenes.

Device Configuration App (DCA) for Gewiss GW90873 - Gateway KNX/DALI 64/16 advanced

Device Configuration App (DCA) for IPAS DALIControl e64 Pro V2
Order No.: 4101-145-02/03
Application: DaliControl e64 Pro_V2.1.0

Support of Input Devices
Coloured light control including device type 8 ECGs:
Colour temperature (DT-8 Sub-Type TC)
XY colour (DT-8 Sub-Type XY)
RGB (DT-8 Sub-Type RGBWAF)
HSV (DT-8 Sub-Type RGBWAF)
RGBW (DT-8 Sub-Type RGBWAF)
HSVW (DT-8 Sub-Type RGBWAF)

This Gira Device Configuration App (DCA), which is fully integrated into the ETS and supplements the standard parameter dialog, is used to carry out DALI commissioning and the DALI test for the Gira DALI Gateway Colour (order number 2111 00, 2112 00). This makes it possible to identify, address and assign DALI operating devices using the familiar ETS environment without having to use additional software beyond the ETS.

To carry out the DALI commissioning and the DALI test to the DALI-2 Gateway Colour this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

The SpaceLogic KNX DALI Gateway Pro is a device used to control ECGs with a DALI 2.0 interface via the KNX installation bus.
The special surface for the configuration of DALI segments is designed as a DCA (Device Control App) for the ETS5.

A plugin of configuration DALI bus deveice by KNX bus

Device configuration application for PLC-based WAGO devices.

The app is used for the convenient configuration of 2.4" Display (Trevion, alba, SIDUS, SAGA).

Tool used for the configuration of the By-me Plus KNX Vimar router

DCA for the DALI configuration of the KNX DALI2 Gateway secure TYFS671D and TYFS672D.

A plug-in of configuration DALI bus device by KNX bus

To carry out the DALI commissioning and the DALI test to the KNX DALI-2 Gateway sec. this completely ETS-integrated Device Configuration App (DCA), which supplements the standard parameter dialogue, is used. This enables the identification, addressing and assignment of DALI control gears by using the familiar ETS environment without having to use additional software beyond the ETS.

A plugin of configuration DALI bus device by KNX bus

This application enables advanced configuration and commissioning of DALI ECGs through Zennio DALI devices.

A ir module of configuration device by knx bus

A plug in of configuration DALI bus device by KNX bus

Theben DALI-Gateway P64 V2 KNX
Order no.: 4940303
Application: DALI-Gateway P64 KNX V2

Device Configuration App (DCA) for the DALI configuration. The DCA is used for addressing and grouping, as well as creating scenes, timers and effects.

For devices with firmware version V2.x
Device Configuration App (DCA) for commissioning the DALI participants.
For the MDT DALI Control PRO64 Gateway with article number SCN-DA641P.04S.